What is the difference between 1.4301 stainless steel and 304?
Lämna ett meddelande
What is the difference between 1.4301 stainless steel and 304? When purchasing stainless steel materials, many people will encounter such questions: Are 1.4301 and 304 stainless steel the same material? Can 1.4301 stainless steel and 304 replace each other? Is there any difference in quality or price?

1. 1.4301 stainless steel and 304:Standards
| 1.4301 | EN 10088 (European Standard) | |
| 304 |
18-8 austenitic stainless steel family, containing approximately 18% chromium and 8% nickel. They are widely used in .
2. 1.4301 stainless steel VS.304:Chemical Composition
| 1.4301 (EN) | 304 (AISI) | |
|---|---|---|
| 17.5–19.5% | 18.0–20.0% | |
| 8.0–10.5% | 8.0–10.5% | |
| Less than or equal to 0.07% | Less than or equal to 0.08% | |
3.1.4301 stainless steel VS.304:Mechanical Properties Comparison
| 1.4301 (EN Standard, Annealed) | 304 (ASTM Standard, Annealed) | ||
|---|---|---|---|
| Greater than or equal to 520 MPa | Greater than or equal to 515 MPa | Slight difference in standard minimums, but actual production typically yields 520–700 MPa for both; difference is negligible. | |
| Greater than or equal to 215 MPa | Greater than or equal to 205 MPa | EN standard for 1.4301 is slightly higher, but after processing (e.g., cold forming, welding), actual values are comparable. | |
| Greater than or equal to 40% | Greater than or equal to 40% | ||
| Less than or equal to 187 | Less than or equal to 187 | ||
| ~200 GPa | ~200 GPa | ||
| 0.28 | 0.28 | ||
| 200–330 MPa | 210–440 MPa | 304 may have a slightly higher upper fatigue limit, but in practical applications, the difference is minimal and condition-dependent. |
For procurement, the key question is: Can 1.4301 stainless steel and 304 be used interchangeably? Will it affect product quality or certification?
1. Interchangeable in conventional engineering and industrial products: As long as the customer specifications or project standards are met, 1.4301 and 304 can be considered equivalent materials.
2. Special projects must be executed according to drawings or certification: For example, if the project exported to Europe requires EN standard certification, 1.4301 should be specified; if it is accepted according to ASTM standards, 304 should be marked.







