Hem - Kunskap - Detaljer

What is the difference between 1.4541 stainless steel and 321?

1.4541 vs. 321 Stainless Steel – Same Material, Different Standards

1.4541 and 321 stainless steel are essentially the same material named under different standard systems.

1.4541: Commonly used in the EU and European countries, following the EN standard.

321: Widely used in the US, China, Japan, and other countries, under ASTM, GB, and JIS standards.

1.4541 Vs. 321 Stainless Steel

1.4541 321 Stainless Steel
EN standard (EN 10088-2), Europe ASTM standard (ASTM A240), US & global
European designation, equivalent to international 321 stainless steel International/common designation, equivalent to EN 1.4541
DIN: X10CrNiTi18-10 (Germany)
China: 06Cr18Ni10Ti
Japan: SUS321
Korea: STS321
China (old grade): 1Cr18Ni9Ti

 

II.1.4541 vs. 321 Stainless Steel  Chemical Composition

Both grades are titanium-stabilized austenitic stainless steels with identical core compositions (by mass %):

Cr (Chromium): 17.0% – 19.5%

Ni (Nickel): 9.0% – 12.0%

Ti (Titanium): Greater than or equal to 5×C%

C (Carbon): Less than or equal to 0.08%

Others: Mn Less than or equal to 2.0%, Si Less than or equal to 1.0%, P/S Less than or equal to 0.045%

 

III. 1.4541 vs. 321 Stainless Steel Mechanical and Physical Properties

1. Thermal & Mechanical Properties

1.High-temperature resistance:
Maximum service temperature: 850 degree (short-term peaks up to 1000 degree )
Suitable for heat exchangers, heating pipelines, and other high-temp applications.

Room-temperature mechanical properties:

Tensile strength: Greater than or equal to 520 MPa

Yield strength: Greater than or equal to 205 MPa

Elongation: Greater than or equal to 40%

2. Corrosion Resistance


Superior to 304 stainless steel in welded areas (HAZ), due to titanium's stabilizing effect.


Performs well in air, water, and mildly acidic/alkaline environments, but has lower resistance to chlorides (Cl⁻) than 316 stainless steel. Avoid long-term exposure to seawater or brine.

 

IV. 1.4541 vs. 321 Stainless Steel Application Fields

High-temperature industrial equipment:

Post-weld use without complex heat treatment

Welded pipes in high-temp service (e.g., distillation columns, boiler connections)

500–800 degree

Lightly corrosive high-temperature conditions (e.g., sulfur-containing flue gas)

Welded corrosion-resistant parts (e.g., food processing equipment)

Skicka förfrågan

Du kanske också gillar